If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
Answer machine 57
Time saver
When you ring in to access your
answer machine remotely, if
you have set Time saver as the
answer delay and you have new
messages it will answer after 10
seconds. If you don’t have new
messages it will answer after
20 seconds. This means you
can hang up knowing that you
have no new messages, saving
you the time and the cost of
the call.
For compatibility with BT 1571
(or another voicemail service)
Make sure the answer delay is
set for your answer machine
to answer before the voicemail
service. Therefore, the answer
delay should be less than on
your voicemail service. For BT
1571 do not set the answer
delay to more than 5 rings.
Set the answer delay
1. Select Menu, Answer Phone is displayed, press OK.
2. Press until Answer settings is displayed,
press OK.
3. Press or to display either Answer & record
or Answer only and press OK.
4. Answer delay is displayed, press OK. Press
or
to display the number of rings you want
(2-10 rings or Time saver) and press OK. Saved will
be displayed.
Set the maximum message length
You can set the maximum length that an answer
machine message can be: 1 minute, 2 minutes or 3
minutes. The default setting is 3 minutes.
1. Select Menu, Answer Phone is displayed, press OK.
2. Press until Answer settings is displayed,
press OK.
3. Answer and record is displayed, press OK.
4. Press to display Maximum msg length and
press OK. Press
or to select the length you
want and press OK. Saved will be displayed.
To Next Page
Loading...
