Settings
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
68
There are two handset tones:
keypad tones and confirmation
tones. You can turn these on or
off, the default setting is On.
Keypad tones: when turned on,
you will hear a beep after each
button press.
Confirmation tones: when
turned on, you will hear a tone
after each successful action
or after an error has occurred.
This does not include the
battery charging tone when the
handset is placed on the base/
charger, low battery or out of
range warnings or tones used in
calls such as Call Waiting or
Call Intercept.
There are 5 contrast levels
to choose from. The default
setting is Level 3.
Adjust the handset ringer tone
1. Select Menu, scroll to display Settings and press
OK.
2. Sounds is displayed, press OK. Press to display
Tone adjustment and press OK.
3. Press or to display either Standard,
Increase treble or Increase bass and press OK.
Saved is displayed.
Turn the handset tones on or off
1. Select Menu, scroll to display Settings and
press OK.
2. Sounds is displayed, press OK. Press to display
Handset tones and press OK.
3. Press or to display Keypad tones or
Confirmation tone and press OK.
4. Press or to display Tones on or Tones off
and press OK. Saved is displayed.
Change the handset display contrast
1. Select Menu, scroll to display Settings and
press OK.
2. Press to display Display and press OK.
To Next Page
Loading...
