If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
Help 83
No display
• The batteries may be flat, dead or incorrectly inserted.
• Recharge or replace the batteries.
Range icon flashes
• Make sure the handset is registered to the base, see page 78.
• Check that the mains power is correctly connected to the base.
• Check that the handset is within range of the base.
• If the batteries are low, place the handset on the base/charger to recharge.
You hear the busy tone when you press
• Make sure the handset is in range of the base.
• Another handset registered to your BT4600 base may be on the line and
Auto Join is switched off, please see page 70.
Answering machine doesn’t record any messages
• The memory may be full. Play and delete old messages, pages 59-60 and 61-62.
Answering machine messages have the wrong date and time
• Have you set the date and time? See page 73.
Can’t access your messages from another phone
• Have you changed the remote access PIN? See page 64.
Always keep a note of the new PIN in a safe place.
• Has Remote access been turned off? To turn remote access on, see page 64.
To Next Page
Loading...
