EasyManua.ls Logo

BT HUDSON 1500 - Using the Phone; Basic Call Operations

BT HUDSON 1500
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
When you make a call, the In use light
on the base ashes.
Call timer
Your handset will automatically time
the duration of all external calls.
The handset display shows the call
duration both during and for a few
seconds after your call.
Out of range warning
When the handset goes out of range
of the base,
ashes. If you are on
a call, the line will hang up. Move
back within range. The handset will
automatically re-connect to the base.
Press and hold CleAr to delete the
whole number and return to standby.
Press SAve to add the number to the
Phonebook, see page 18.
Using the phone
Switch handset on or off
To switch off:
1. Press and hold
until the handset switches off, after about
5 seconds.
To switch on:
1. Press and hold
until the handset switches on.
Make an external call
1. Press .
2. When you hear the dial tone, dial the number.
Preparatory dialling
1. Dial the number rst. If you make a mistake press CleAr to
delete the last digit.
2. Press
to dial.
End a call
1. Press .
Options during a call
1. During a call, press optionS to open the in-call menu.
2. Scroll
and between the two options phoneBook or
StArt 2nD CAll:
Open the Phonebook during a call
1. During a call, you can check entries in the Phonebook.
Press optionS then select phoneBook.
2. Scroll
or to the entry you want.
3. Press SeleCt to see the number.
4. Press BACk to return to the previous menu level.

Table of Contents

Related product manuals