BT HUDSON 1500 - Call Screening at the Handset; Adjust the Incoming Message Length; Remote Access; Remote Access on; off

36
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
Call screening at the handset
If handset call screening has been turned on, you will be able to
listen to the caller recording their message via the handset by
pressing SCreen.
If you want to speak to the caller, press
as they are leaving
their message.
Adjust the incoming message length
The incoming message length (ICM) is set at the default of 3
minutes. You can change this to 2 minutes if you want to.
1. Press Menu, scroll
to AnSwer MAChine. Press SeleCt.
2. Scroll
to AnS SettingS and press SeleCt.
3. Scroll
to iCM length. Press SeleCt.
4. Scroll
or
to choose either 2 MinS or 3 MinS.
Press SeleCt.
5. Press BACk to return to the previous menu level.
Remote access
When switched on, you can call in from another phone to listen to
your messages and operate your answering machine.
Remote access on / off
You can switch remote access on or off. When on, you can operate
your answering machine from any other Touchtone
TM
phone.
Default setting is On.
1. Press Menu, scroll
to AnSwer MAChine. Press SeleCt.
2. Scroll
to AnS SettingS and press SeleCt.
3. Scroll
to reMote ACCeSS. Press SeleCt.
4. Scroll
or
to ACtivAte or DeACtivAte. Press ok.
5. Press BACk to return to the previous menu level.