BT HUDSON 1500 - Internal and Conference Call Features

44
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
Internal calls are only possible when
more than one handset is registered
to the base.
If there is only one other handset
registered this handset will be
called automatically.
De-register a Hudson handset
1. Press Menu, scroll
or
to ADvAnCeD Set and
press SeleCt.
2. Scroll
to De-regiSter, press SeleCt.
3. Enter the system PIN (default setting 0000) and press ok.
All handsets available for de-registration are listed.
4. Scroll
or
to the handset you want to de-register and
press SeleCt.
5. Display shows De-regiSter? Press ok to conrm or BACk
to cancel.
Select a base
You can register a BT Hudson handset with up to 4 GAP
compatible bases.
1. Press Menu, scroll
to hAnDSet SettingS and
press SeleCt.
2. Scroll
to SeleCt BASe, press SeleCt.
3. Scroll
or
to select the base you want and press SeleCt.
4. Press BACk to return to the previous menu level.
Internal calls
Call another handset
1. Press . All available handsets are displayed.
2. To call the handset, select the handset number you want.
If the handset is already in use, you will hear the busy tone.
3. Press
to hang up.
Conference call
Conference on / off
When Conference is switched On, a second handset can join a call
between the rst handset and an external caller by pressing
.
The default setting is off.
1. To change the conference call setting, press Menu, scroll
or
to ADvAnCeD Set and press SeleCt.
The conference setting cannot be
changed while a call is in progress.