32
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
Recording memory full
If the recording memory becomes full while a caller is leaving a
message, they will hear “Thank you for calling” and the answering
machine will hang up.
Any new callers will hear the Answer only message.
If the memory is full you must delete messages before your BT
Hudson 1500 can begin recording again.
Message playback
1. Press . The number of messages is announced and they
are played back.
During playback, press:
to play the next message.
once to skip back to the start of the current message or
twice to play the previous message.
to delete the current message.
to stop playback.
Adjust volume
1. Press to decrease the speaker volume or to
increase the volume. The volume level will be shown on the
counter display for a few seconds after the button is pressed.
Delete all old messages
New, unplayed messages cannot be deleted, you must play them rst.
1. To delete all old messages, press and hold
.
Call screening
1. Providing the base speaker volume is set loud enough, you can
hear a caller leaving a message. If you want to interrupt and
speak to the caller, press
on the handset.
Each message is played back with the
day and time of the call announced.
If the base speaker is set to 0,
call screening is switched off.
To Next Page
Loading...
