BT HUDSON 1500 - Play the Outgoing Message; Delete Your Outgoing Message; Message Playback

34
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
Play the outgoing message
1. Press Menu. Scroll to AnSwer MAChine. Press SeleCt.
2. Scroll
to outgoing MSg and press SeleCt.
3. AnSwer & reCorD is displayed. Press SeleCt or scroll
to AnSwer only and press SeleCt.
4. plAy ogM is displayed. Press SeleCt to play the message
through the handset loudspeaker.
5. Press BACk to return to the previous menu level.
Delete your outgoing message
1. Press Menu. Scroll to AnSwer MAChine. Press SeleCt.
2. Scroll
to outgoing MSg and press SeleCt.
3. AnSwer & reCorD is displayed. Press SeleCt or scroll
to AnSwer only and press SeleCt.
4. Scroll
to Delete and press SeleCt. Then conrm by
pressing ok to delete your personal outgoing message.
5. Press BACk to return to the previous menu level.
Message playback
If a message is new: Press plAy from the standby screen.
Or:
1. Press Menu, scroll
to AnSwer MAChine. Press SeleCt.
2. plAy is displayed. Press SeleCt to play your messages.
During playback, press optionS to select:
repeAt – press SeleCt to repeat the current message.
previouS – press SeleCt to play the previous message.
next – press SeleCt to skip to the next message.
Delete – press SeleCt to delete the current message.
Stop – press SeleCt to stop playback.
During playback you can also press
to switch playback
to the earpiece.
3. Press BACk to return to the previous menu level.
When recording your Answer Only
message, remember to advise your
caller that they will not be able to
leave a message.
Your own Answer Only message will
replace the pre-recorded message.
You can delete your own recorded
OGM. This will automatically reinstate
the pre-recorded message.
You cannot delete the pre-recorded
message.