10- 26 Service Guide LWE180, LWE200, LPE200, LPE240 © BT Europe AB
Electrical systems – 5000 LPE 240
Parameters
T-code Valid from serial number Date Order number
660, 661, 662, 497 723984- 2005-05-11 225553-040
10.6.2 Parameter description
Parameter 1
Possibility to adjust the speed in the low speed range (when the safety
gates are not used).
Parameter 2
Possibility to adjust the speed in the high speed range (when the safety
gates are used).
Parameter 3
The lower value of the parameter the longer time it takes to accelerate
the truck to top speed.
Parameter 4
Defines motor brake force when lever (L1) goes to neutral position.The
lower value of parameter the longer time to reduce speed.
Parameter 5
The time until the truck will be switched off when a key pad is used.
Time is counted from when the latest power consumer is used.
Value = 0 gives 4 hours.
To Next Page
Loading...
