BT LWE200 - Braking; Lifting the Forks; Lowering the Forks; Horn

9- 16 Service Guide LWE180, LWE200, LPE200, LPE240 © BT Europe AB
Electrical System – 5000 LWE 180/200 LPE 200
Hour meter
T-code Valid from serial number Date Order number
660, 661, 662, 497 723984- 2005-05-11 225553-040
9.3.5 Braking
The brake is always engaged when the truck is started with the tiller
arm in the top or bottom position (S10 open). The brake is released
once all the requirements for driving have been fulfilled, and the truck
begins to move.
Requirements for the truck to be able to brake:
• S10 open.
9.3.6 Lifting the forks
•S34
• S31 closed.
• Battery status OK (if battery capacity remaining is > 20 %).
9.3.7 Lowering the forks
• S41 activated.
9.3.8 Horn
• S18 activated.
9.4 Hour meter
• Press and hold S18 while turning S17 to “ON” position.
• Press and hold S18 until H = hour meter is displayed.
• You have now selected H = hour meter. The “B” symbol lights up.
• You can now select type of hour meter by pressing the speed control.
1A = Key time
2b = Movement time
3c = Drive motor time
4d =Pump motor time
5s = Time remaining until service
A
B
C
DE