BT LWE200 - Cleaning the Filter

12- 4 Service Guide LWE180, LWE200, LPE200, LPE240 © BT Europe AB
Hydraulic, pneumatic – 6000 LPE 240
Cleaning the filter
T-code Valid from serial number Date Order number
660, 661, 662, 497 723984- 2005-05-11 225553-040
12.3 Cleaning the filter
• Dismantle the hydraulic unit from the machine.
• Empty the oil from the tank.
• Loosen and remove the hose clip (1).
• Loosen and remove the two tank holders (2).
• Loosen the suction filter (5) and the return filter (3).
• Clean the filter in an environment friendly cleaning agent.
Assemble in the reverse order.
2
1
3
4
5