Warning and information plates and symbols
© BT Industries AB 222714-040
12
Warning and information
plates and symbols
The figure shows the position and significance of the plates and
symbols located on the truck.
1. Modification plate
2. Travel direction
3. Hydraulic control: Lift
4. Hydraulic control: Lower
5. Signal/Horn
6. Identification plate
7. Serial number
8. Hydraulic oil filling
9. Lifting points
10. Passengers prohibited
11. Capacity plate
12. Do not walk under elevated load
13. Do not stand on the forks
14. Hydraulic lever: Lifting the forks
15. Hydraulic lever: Lowering the forks
To Next Page
Loading...
