EasyManua.ls Logo

BT OSE100 - Collecting and Depositing Loads

BT OSE100
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Transporting loads
© BT Industries AB 222714-040
38
Collecting a load
Lower the forks and carefully position the forks under the
load.
Lift the forks. Do not drive at the same time as you lift the
forks.
CAUTION!
Lost stability.
Lifting a loaded pallet when the truck is still moving can result
in the load falling off of the pallet.
Never lift a load if the truck is moving.
Start slowly and then increase the speed.
Depositing a load
Stop the truck and lower the forks. Do not lower the forks until
the truck has come to a standstill.
Leave the load so that it does not block, e.g. truck aisles or
emergency exits.
CAUTION!
Lost stability.
Lowering a loaded pallet when the truck is still moving can
result in the load falling off the pallet.
Never lower a load if the truck is moving.
Start slowly and then increase the speed.

Related product manuals