Daily service and function checks
© BT Industries AB 222714-040
44
Daily service and function
checks
• The operator is responsible for the daily service and care of
the truck.
• Carry out the daily service at the start of the working day or
shift, before the truck is used. The daily service is a function
control as set out in the checklist below.
• You need no tools to carry out the service checks.
• If you fail to carry out the daily service, the safety and reliabil-
ity of the truck can be affected.
WARNING!
Never neglect the daily service and function checks.
Serious accidents can occur.
Always report any faults or damage to the management with-
out delay. Never use a truck that has faults.
Pos no Check points Action
1 Operating control Check its function, forwards/backwards
2 Hydraulic functions Check its function
3 Horn Check its function
4 Steering Check its function
5 Running time Carry out maintenance as set out in the table in
chapter Maintenance
6 Platform/ Brake switch Check its function
7 Hydraulic system Check the oil level and for oil leakage
8 Drive unit Inspect abnormal noises and leakage
9 Brake Check its function
10 Chassis Check for damage, remove dirt and the like
11 Wheels Check for damage, remove oil, metal chips and the
like
12 Lifting device Check for damage, remove dirt and the like
13 Battery Check the acid level and the charge condition
To Next Page
Loading...
