Driving
© BT Industries AB 222714-040
35
Driving
Starting the truck
• Make sure the emergency switch off is not pressed in.
• Enter the code on the keyboard and exit with I.
• Make sure the battery controller indicates a sufficient charge
level (1/2 - 1).
NOTE!
Low charge level.
A low charge level can result in damage to the battery with pro-
longed operating.
Do not drive without first charging the battery.
• Lower the steering unit to the drive position (F).
• Move the travel direction selector/speed control in the desired
direction.
• The parking brake is released automatically when the speed
control is activated.
The maximum travel speed of 12 km/h can only be achieved
when the operator stands on the ride-on platform.
• Always drive with great care when cornering. Always reduce
speed when approaching a corner.
WARNING!
Loss of function.
Safety risk.
Always check the safety functions listed below before begin-
ning the day’s work.
- That the speed control functions in both directions.
- That the horn functions correctly.
- That the steering functions correctly.
- That the brakes function correctly.
- That deceleration functions correctly.
- That the hydraulic functions are operational.
• Start gently by accelerating slowly until you reach the desired
speed.
WARNING!
Dangerous driving.
Accidents can occur.
Always drive with care, good judgement and responsibility as
set out in the general safety regulations.
To Next Page
Loading...
