Controls and instruments
© BT Industries AB 222714-040
26
Battery disconnector and battery con-
nector (7)
• Remove the battery disconnector to cut the power supply in
the event of:
- An accident.
- Emergency situation, risk of an accident.
- Welding work.
NOTE!
The battery can be damaged.
When welding using an electric power source the welding cur-
rent can enter the battery.
It is necessary to disconnect the battery.
To charge the battery, pull out the battery disconnector and con-
nect the charger connector to the truck’s permanent battery con-
nector. After charging, replace the battery disconnector.
To Next Page
Loading...
