Battery
© BT Industries AB 222714-040
40
• Release the battery from the battery lock, if fitted.
• Lift out the discharged battery and put in the charged one. If
the truck has a battery change table: Slide out the discharged
battery.
• Connect the intermediate cables from the truck to the
charged battery and drive the truck into position near the
charged battery.
• Turn off the truck, disconnect the intermediate cables and
slide in the charged battery.
• Lower the battery lock into position and make sure it is prop-
erly fastened.
• Connect the battery connector to the battery
• Close the battery compartment cover.
• Reset the emergency switch off.
WARNING!
Falling battery.
If the truck should overturn the battery can fall if the battery
catches are not fastened.
Ensure the battery catches are fastened.
WARNING!
Falling battery.
When changing the battery, it can be dropped.
Always lift the battery using an approved lifting device and use
a battery yoke intended for the battery.
To Next Page
Loading...
