T-code Valid from serial number
403-414, 669-671, 716-718 713962-
Date Order number
2005-09-09 218920-040
5- 14 Service Manual REFLEX RR B,E RR B,E CC © BT Europe AB
Preventive maintenance – P2
Maintenance Schedule
U indicates what appears in the Daily Care and Function Checking
chapter and must be carried out by the driver.
X indicates what should be done during the various services. Other let-
ters indicate oil and grease quality.
When points with longer time intervals are addressed, the points with
shorter time intervals should also be addressed unless otherwise stat
-
ed above.
6600.2 Check the mountings X
7100 Mast and reach carriage
7100.1 Check the lowering speed X
7100.2 Check for cracks or damage X
7110.1 Lubricate mast beams by the runners F
7120.1 Check for wear on lifting chains and
sprockets.
X
7120.2 Check adjustment of lifting chains.
Check chain bolts and chain mountings.
Check and tighten the lock nuts and
inspect the safety pins on all chains.
X
7120.3 Lubricate lifting chains D
7150.1 Check for play on rollers. X
7190.1 Check and tighten mast mountings. X
7200.1 Check the function of accessories. U X
7400 Lifting devices
7400.1 Check for wear to the forks and other lift-
ing devices.
U X
7400.2 Check for damage and deflection on the
forks and other lifting devices.
U X
7400.3 Check wearing strips and tilt angle on the
fork carriage.
7400.4 Lubrication (see C-code 7400) X
9500 Extra equipment
9500.1 Check the fire extinguisher X
Table 5: Maintenance schedule RR B/E 2-8 CC
Pos.
no.
Work to carry out
Interval in hours 5 20 250 500 1000 3000
Interval in days/weeks/months 1 d 1
wk
3 m 6 m 12 m 36 m
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...