Store a phonebook entry
You can use the phonebook to store up to 30 names and
numbers for easy dialling. Each number can be up to 20
digits and each name up to 12 characters long.
1. Press to display
PHONEBOOK
.
2. Press to confirm.
3. Display shows
ADD ENTRY
. Press to display
NAME?
.
4. Enter a name using the keypad
(see character map,
page 19)
, then press .
5. Enter the telephone number, then press .
6. Select a ringer melody (
1 to 3) using or , then press
. You hear a confirmation beep.
If you have Caller Display enabled on your line and your
caller’s details are matched to an entry in the phonebook
then your handset will ring with the melody selected for
that caller.
Phonebook
icon is displayed while you are
using the phonebook.
Using the phonebook with
additional handsets
If you are using more than one
handset, each handset has a
separate phonebook, so you can
store 30 entries per handset.
Deleting characters/digits
If you make a mistake, press .
Cancel storing
Press once to return to
ADD ENTRY.
Press repeatedly to exit.
Entering names:
For example, to enter the name
Tom:
Press 8 for T
.
Press 6 three times for O.
Press 6 for M.
The maximum length for names is
12 characters.
You cannot store a name without
a number.
Inserting a Pause
You can insert a Pause in the
dialling sequence. This can be
useful if your phone is connected
to an internal switchboard, see
page 53.
To Next Page
Loading...
