The default setting is 0000.
You can choose a range of settings to suit your personal
preferences.
Security PIN
Your Studio 1100 has a security PIN code which you will
need to change some of the base settings. The default
setting is 0000. You may want to change this to prevent
unauthorised changes to your settings.
To change the base PIN code
1. Press .
2. Press or until
SETUP
is displayed then press
to confirm
3. Press or until
PIN CODE
is displayed then
press to confirm.
PIN?
is displayed.
4. Enter your old 4 digit PIN then press .
NEW PIN
is displayed.
5. Enter your new 4 digit PIN then press .
RETYPE
is displayed.
6. Enter your new 4 digit PIN again for verification then
press . The handset beeps to confirm.
7. Press
twice to return to the idle screen.
To Next Page
Loading...
Need help?
General
