32
Naming a handset
Each handset registered to the base is assigned a
number. You can give a handset a name as well as a
number to match the user or location e.g.
ANNE
or
OFFICE
. The name can be up to 10 characters long.
1. Press .
2. Press or until
HANDSET
is displayed.
3. Press .
4. Press or until
NAME
is displayed then press .
5. Use to delete an existing name. Enter a name using
the keypad, then press .
NAME
is displayed until the
product returns to standby and then the new name you
have set will be displayed.
The new handset name will replace the handset name in
the display. The handset number will be shown on the far
right hand corner of the display.
To Next Page
Loading...
Need help?
General
