28 Handset settings
To change the internal ringer volume
1. Press .
2. Press or until
HANDSET
is displayed.
3. Press .
4. Press or until
INT RING VOL
is displayed then
press . The current setting is played.
5. Press or to select a volume then press .
A confirmation beep is played.
Key beeps
Your BT Studio handset emits beeps to alert you to
certain situations. You can set the handset to beep:
If the battery is low.
If you go out of range of the base.
To beep as confirmation each time a handset button
is pressed.
These beeps can be switched ON or OFF.
However, beeps which confirm settings cannot be
switched off.
To Next Page
Loading...
