IMPORTANT
You can only register your BT
Studio 1100 handset to another
base if it is GAP compatible.
You will not be able to register
your BT Studio 1100 handset to a
BT Studio or BT Studio 500 base
as these products are not GAP
compatible.
Your BT Studio 1100 handset can be registered to up to
4 other bases.
Registering your BT Studio 1100 handset to
another base
On the base:
1. Press
and hold to put the base into registration
mode.
The base beeps and the In use light flashes while the
handset is being registered.
On the handset:
2. Press .
3. Press or until
REGISTER
is displayed then press .
4. Press or until
REG BASE
is displayed then
press .
5.
BASE 1 2 3 4
will be displayed.
The base that you are currently registered to will flash.
6. Enter the number of the base you want to register to.
SEARCH 1
is displayed (where 1 is the base number you
are searching for).
To Next Page
Loading...
Need help?
General
