Base settings
The default setting is 3.
WARNING
If you reset the handset and base,
you will lose any names or
numbers stored in the phonebook,
redial list and calls list.
3. Press or until
BASE MELODY
is displayed then
press . The current melody is played.
4. Press or to select a melody then press
to select.
5. Press
twice to return to the idle screen.
To change the ringer volume
1. Press .
2. Press or until
SETUP
is displayed then
press to select.
3. Press or until
BASE VOLUME
is displayed then
press to select.
4. Press or to select and play a volume then press
. The handset gives a confirmation tone.
5. Press
twice to return to the idle screen.
Reset the handset and base
1. Press .
2. Press or until
SETUP
is displayed then
press to select.
To Next Page
Loading...
