54
To insert a pause
1. Begin storing a number and press P where a pause is
needed.
P
is shown in the display.
Recall
The R button is used when connected to certain
switchboards, e.g. to transfer calls, and for some
BT Calling Features or those services available via
your network provider.
Dialling mode
Your BT Studio 1100 is set to tone dialling. If required
you can switch it to pulse dialling.
1. Press .
2. Press or until
SETUP
is displayed then
press .
3. Press or until
DIAL MODE
is displayed then
press .
4. Press or to select either
TONE
or
PULSE
then
press .
5. Press
twice to return to the idle screen.
General information
For more information on storing
numbers see ‘Store a phonebook
entry’ on page 18.
Pause
You may also need to insert a
pause when storing international
dialling codes, charge card
numbers and with other
tele-banking facilities.
To Next Page
Loading...
