30
Using Single Watch Mode
When Single Watch mode is enabled, the radio will use the full screen to
display all relevant information for a single channel, including: Channel
Name, Zone, Frequency
This provides a clear and comprehensive view of your selected channel,
making it easier to monitor and manage your communications.
Manual Programming (Channels Memory)
Memory channels store commonly used frequencies for easy retrieval.
The radio supports up to 10 zones with a maximum of 100 channels per
zone. Each channel can store receive and transmit frequencies, transmit
power, group signaling information, bandwidth, ANI/PTT-ID settings, and
a twelve-character alphanumeric identier or channel name.
Frequency Mode vs. Channel Mode
In standby mode, press the V/M key to switch between Frequency
(VFO) mode and Channel (MR) mode. These two modes serve different
purposes and can often be confused.
Frequency Mode (VFO)
This mode is used for temporary frequency assignments, such as
testing frequencies or quick eld programming when permitted. It
allows for more exibility in setting and adjusting frequencies
on the y.
Channel Mode (MR)
This mode is used for selecting preprogrammed channels. It is ideal
for regular use, as it provides quick and easy access to commonly
used channels that have been saved in the radio's memory.
By understanding the distinct functions of each mode, you can effectively
utilize your radio for various communication needs.
To Next Page
Loading...
