VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
Add a NOAA Channel
The following steps assume that you're in Frequency (VFO) mode and that you've entered the NOAA
frequency to store to memory.
1. Press the key to enter the menu.
2. Enter “46” on the numerical keypad to get to MEM-CH.
3. Press to select.
4. Use the and keys to select an empty memory channel or enter it directly on the
numerical keypad.
5. Press the key to confirm.
a. NOTE: If the station is actively receiving it will not store. To save an active receiving
channel – remove the antenna to prevent the channel from receiving and store to
memory.
6. Press the key to exit the menu.
Switch your radio to Memory (MR) to test your newly added NOAA channel.
To Next Page
Loading...
