BTECH GMRS-50X1 - Programming Scanning Channels; Manual programming

26
VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
!
GMRS-50X1!
!
!
!
Chapter!4.!–!Programming!Scanning!
Channels!
The BTECH GMRS-50X1 features 226 additional (256 total) memory channels that each can hold:
Receive frequencies, group signaling information, bandwidth, and a seven-character alphanumeric
identifier or channel name
1.
GMRS Channels (001-030) are hard loaded and cannot be removed. Settings such as the calling tone can
be edited on GMRS channels.
Channels 000, 031-225 can be added or deleted via computer or manual programming as additional
listen (receive) only channels.
Manual!programming!
To create a new scanning channel, start by switching your radio to Frequency (VFO) mode (Press and
Hold button from the microphone or use the V/M button on the front panel).
When in Frequency (VFO) mode, select your desired receive frequency using the numerical keypad.