VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
4. Press [Call] Key to send the same 2TONE you have selected in Menu 22.
5Tone Receive Settings, Transmit Setting (Call Key)
1. Press [MENU] Key select 18 OPTSIG, press [F] Key select 5TONE function.
2. Press [MENU] Key select 22 S-INFO, press [F] Key select pre-code signal group (1-15). (The 5Tone
Signal must be saved first in the PC software setting under 5TONE settings)
3. If properly set up (on Menu 18, and 19), your radio will open the squelch when it receives the
required 5TONE signal.
4. Press [Call] Key to send the same 5TONE you have selected in Menu 22.
To Next Page
Loading...
