VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
Chapter 5. – Other Settings
Toggle from High, Mid, to Low Power
A quick press of the Microphone ‘#’ will alternate power levels from High, Mid, to Low power
*(Channels 15-30 Only)
Storing an FM Radio Station and Scanning
Use PC software to store FM radio channels names, you can name the FM channel and instead of
displaying the frequency your FM station will display the name. (software FM option (FM channels are
not stored, only the channel names are)) Press the microphone [*] Key to scan the FM radio.
Keypad Lock-out
Hold the microphone [# key] for 2 seconds at standby to turn on/off the keypad lock-out function. (The
Lock icon appears, when the radio is locked out)
PTT ID Setting
1. Use PC software to change PTT-ID code.
2. Set the Menu 18 settings on the radio to select the PTTID signal mode (2Tone, 5Tone, or DTMF),
3. Set the Menu 20 settings to select when the PTTID is transmitted.
To Next Page
Loading...
