BTECH GMRS-50X1 - Read more about Remote Commands; DTMF Receive Settings, Transmit Setting (Call Key); 2 TONE Receive Settings, Transmit Setting (Call Key)

VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
33
Read More About Remote Commands
An In-Depth downloadable PDF is available at: https://baofengtech.com/support which details Remote
commands and how to use them. This Document Explains with examples on how DTMF remote
commands are used
DTMF Receive Settings, Transmit Setting (Call Key)
1. Press [MENU] Key select 18 OPTSIG, press [F] Key select DTMF function.
2. Press [MENU] Key select 22 S-INFO, press [F] Key select pre-code signal group (1-15). (The DTMF
Signal must be saved first in the PC software setting under DTMF settings.
3. If properly set up (on Menu 18 and 19), your radio will open the squelch when it receives the
required DTMF signal.
4. Press [Call] Key to send the same DTMF you have selected in Menu 22.
2TONE Receive Settings, Transmit Setting (Call Key)
1. Press [MENU] Key select 18 OPTSIG, press [F] Key select 2TONE function.
2. Press [MENU] Key select 22 S-INFO, press [F] Key select pre-code signal group (1-15). (The 2Tone
Signal must be saved first in the PC software setting under 2TONE settings)
3. If properly set up (on Menu 18 and 19), your radio will open the squelch when it receives the
required 2TONE signal.