VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
Squelch opens for CTCSS/DCS tones only.
Squelch opens when CTCSS/DCS tone is recognized
along with the optional signaling.
Squelch opens when either the CTCSS/DCS tone OR the
optional signaling is recognized.
Send at Beginning of Transmission
Send at the End of Transmission
Send at both Beginning and End
Set Delay Time before transmitting PTT-ID
Can only be set with software
Alarm Mode Completely Disabled
Send Alarm code and ID code
Pager Ring at Reception of Matching
2Tone/5Tone/DTMF
In Channel Mode, edits the Current Name
To Next Page
Loading...
