Buchi V-100 - Removing Transit Fixings

BÜCHI Labortechnik AG Transport and storage | 4
Operation Manual Vacuum Pump V-100 17/52
4.3 Removing transit fixings
Fig.6: Transit fixings on the rear of the Vacuum Pump V-100
1 Transit fixings 2 GL14 cap nuts
Before the V-100 is set up and put into service, the transit fixings (red) have to be re-
moved.
u On the rear of the V-100, unscrew the GL14 cap nuts (2) from the pump intake
and pump outlet.
u Pull off the red transit fixings (1).
u Screw the cap nuts back on.