10 | Appendix BÜCHI Labortechnik AG
48/52 Operation Manual Vacuum Pump V-100
Check valves, set. 4pcs, incl. O-ring 047156
Check valves, set. 4pcs, without O-rings 11058389
Screw caps, set. 5pcs, GL14 040624
Cap nuts, set. 10pcs, screw cap with hole, GL14, incl. FEP seal
Content: Hose barbs, cap nuts, seals
041999
Cap nuts, set. 10pcs, cap nuts with hole, GL14 041956
10.2.3 Spare parts
Connection piece. Straight, for pump head
Content: Connection straight, valve, O-ring, cap nut, GL14, FEP seal
11061580
Connection piece. Bent, for pump head
Content: Connection bent, valve, O-ring, cap nut, GL14, FEP seal
11061579
Lid. For cold trap, Ø68mm 047193
Insulator. For secondary condenser
Prevents formation of condensed water
047183
Ball joint clamp. For BJ35/20 003275
Secondary condenser V. Vertical condenser
Condenses remaining vapors after the vacuum pump outlet. Used
along with a recirculating chiller or tap water
047181
Secondary condenser V. Vertical condenser
Condenses remaining vapors after the vacuum pump outlet. Used
along with a recirculating chiller or tap water
11061840
Pump head. For Vacuum Pump V-100/V-700/V-710 11061578
Pump head, set. For Vacuum Pump V-100
Content: Pump head, set connection piece straight, set connection
piece angled
11061577
Silencer. Incl. cap nut, GL14, FEP seal
For Vacuum Pump V-100 / V-700 or V-710
047090
Tubing. Silicone rubber, Ø6/16, red, 2m
Utilization: Vacuum
040459
Support secondary condenser V. Incl. holder, FEP seal, connec-
tion piece
11055584
Support condenser V/C. Holder 047182
Connection piece. PTFE, Ø6/8mm, 162mm
Tubing between vacuum controller/interface and Woulff bottle
047154
Connection piece. PTFE, Ø6/8mm, 77mm
Tubing between vacuum pump and Woulff bottle
047066
Packaging. V-100/V-700, with glass assembly 045617
Packaging. V-100/V-700, without glass assembly 045616
To Next Page
Loading...
