Buchi V-100 - Operation Modes; Operating with Interface I-100

6 | Operation BÜCHI Labortechnik AG
30/52 Operation Manual Vacuum Pump V-100
6 Operation
6.1 Operating V-100 with Interface I-100
The Vacuum Pump V-100 can be controlled by an Interface I-100. Control encom-
passes the following parameters and functions:
 Setting the required vacuum
 Timer
Details of controlling the V-100 and the other laboratory equipment involved in evacu-
ation can be found in the operating instructions for the Interface I-100.
6.2 Operating V-100 without Interface I-100
1
2
Fig.17: V-100
1 Pump outlet 2 Pump intake (vacuum)
If not controlled by an Interface I-100, the vacuum pump runs in continuous mode and
switches to ECO mode after one hour, see Chapter3.1 "Description of function",
page10.