Standard functions
6
Logamatic 4121, 4122 and 4126 - Subject to technical modifications.
20
6.3 Selecting the operating mode
You can operate the MEC2 programming unit in two ways:
– In automatic mode
– In manual mode
Automatic mode
Generally, homes are heated less at night than during the day. With the MEC2
programming unit, you don't need to adjust the thermostatic radiator valves
before bedtime or in the morning. The automatic changeover of the MEC2
programming unit does this for you. It changes over between day mode
(standard mode) and night mode (setback mode).
The times at which your heating system changes from day to night mode – and
vice-versa – are factory-set via standard programs (Æ
Chapter 7.10). However,
you or your heating contractor can modify these settings (Æ Chapter 7.12).
Manual mode
For example, if you want to heat longer in the evening or not quite as early in the
morning, you can also select day and night mode manually (Æ
Chapter 6.3.2).
You can also use manual mode to heat on cooler days when the system
operates in summer mode.
Tag Zeit Temp
Urlaub Auswahl So/Wi
Anzeige Heizkreis Zurück
AUT
To Next Page
Loading...
Need help?
General
