Buderus Logamatic 4122 User Manual

Extended functions
7
Logamatic 4121, 4122 and 4126 - Subject to technical modifications.
39
7.10 Selecting a standard program
The MEC2 programming unit is equipped with eight different, preset heating
programs that act as standard programs. See the following page for a summary
of the preset times of the standard programs.
Please check which standard program best meets your requirements. First
check the number of switching points, and then the times. The "Family" program
is preset at the factory.
z Open flap.
z Select a heating circuit (Æ Chapter 7.6).
Hold down "PROG". Initially the heating circuit is displayed for which you want
to select a standard program. Approximately 2 seconds later the designation of
the currently selected standard program will appear.
Select the required standard program with the rotary selector (here: "Seniors").
Release "PROG". The displayed program is now selected.
The display shows the program designation and the first switching point
for
the selected heating program (here "Senior program").
Press "Back" to return to the permanent display.
AUT
+
Time switch
Program select.
Seniors
Senior program
Monday
21°C
at 05:30
USER INFORMATION
Switching programs are only effective in automatic mode (Æ Chapter 6.3.1).

Buderus Logamatic 4122 Specifications

General

Brand	Buderus
Model	Logamatic 4122
Category	Control Unit
Language	English