Extended functions
7
Logamatic 4121, 4122 and 4126 - Subject to technical modifications.
33
7.6 Selecting a heating circuit
Your heating system may be equipped with several heating circuits. If you want
to change a setting, e.g. the heating program, first select the heating circuit
whose setting you want to change.
Subject to the equipment level of your heating system, the following heating
circuits can be selected:
– MEC2 heating circuits (all heating circuits assigned to the MEC2
Æ
Chapter 7.8)
– Heating circuit 0 – 8
– DHW
– DHW circulation
z Open flap.
Hold down "Heating circuit", and select the required heating circuit with
the
rotary selector (here: "Heating circ. 2").
Release "Heating circuit". The displayed heating circuit is now selected.
As soon as the heating circuit has been selected, the display returns to
the
permanent display.
To Next Page
Loading...
Need help?
General
