Additional programming options
8
Logamatic 4321/4322 - Technical specifications are subject to change without prior notice.
55
8.1.3 Deleting a heating phase
A heating phase consists of two set points – a start and a stop point. If you wish
to delete a heating phase, both set points must be deleted.
Example:
In the "daytime program" for heating zone 2, you want to delete the Monday
heating phase from 11:30 am to 1:00 pm (11:30 to 13:00 h) to create one single
heating pause from 8:00 am to 5:00 pm (08:00 to 17:00 h).
Your modified program will be saved under the program name "custom" and the
number of the heating zone.
Fig. 18 Deleting a heating phase
A "daytime program"
B New program "custom program 2"
1 Day mode
2 Night mode
3 Delete
To Next Page
Loading...
