Buderus RC35 User Manual

Setup report
Logamatic EMS RC35 programming unit - Subject to technical modifications
54
8
Important settings for your heating system:
Setting options Setting
Reduction mode (night
setback)
Outdoor setback mode, Room
setback mode, shut-down mode,
reduced operation
Control function (Æ page 46) Outside temperature control (with/
without room influence), room temp.
controlled
Htg. charact. curve Design temperature:
Minimum outside temperature:
Offset:
Type of building light, medium, heavy
DHW circulation pump
runtime
1)
1) This function depends on the boiler used.
durat., 2 x, 3 x, 4 x, 5 x, 6 x per hour for
three minutes each time
Priority DHW yes, no
Switching programme
(times Æ page 31)
Standard program name:
user defined program
Tab. 16 Settings made during commissioning

Buderus RC35 Specifications

General

Display	LCD
Temperature Control	Yes
Weather Compensation	Yes
Communication	EMS Bus
Mounting	Wall-mounted
Voltage	24 V
Temperature range	5°C to 30°C
Accuracy	±0.5°C
Protection class	IP20
Weight	0.3 kg
Power consumption	2 W
Switching current	Not applicable
Ambient temperature	0°C to 45°C