EasyManuals Logo

Buderus RC35 User Manual

Buderus RC35
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Logamatic EMS RC35 programming unit - Subject to technical modifications
7
Explanation of symbols and safety instructions
1
1.2 Safety instructions
Installation and commissioning
B Observe these instructions to ensure satisfactory operation.
B The appliance must only be installed and commissioned by an authorised installer.
Risk of damage due to operator error
Operator errors can lead to injuries and/or material losses.
B Ensure that children never operate this appliance unsupervised or play with it.
B Ensure that only individuals who can operate this appliance correctly have access to it.
Risk of scalding at the hot water draw-off points
B During thermal disinfection: do not draw DHW without mixing in cold water as well.
B If the DHW temperatures are set to above 60 °C: do not draw DHW without mixing in cold water
as well.
Warning: frost
The heating system can freeze up in cold weather if it is not in operation:
B Leave the heating system permanently switched on.
B In case of faults: remedy any faults immediately.

Table of Contents

Other manuals for Buderus RC35

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Buderus RC35 and is the answer not in the manual?

Buderus RC35 Specifications

General IconGeneral
DisplayLCD
Temperature ControlYes
Weather CompensationYes
CommunicationEMS Bus
MountingWall-mounted
Voltage24 V
Temperature range5°C to 30°C
Accuracy±0.5°C
Protection classIP20
Weight0.3 kg
Power consumption2 W
Switching currentNot applicable
Ambient temperature0°C to 45°C

Related product manuals