Logamatic EMS RC35 programming unit - Subject to technical modifications
53
Setup report
8
8 Setup report
The setup report is to be completed by your heating contractor during commissioning and is for your
information.
Allocation of heating circuits:
Area of dwelling (examples: ground
floor, granny flat)
Remote control (RC35,
RC2x, RC20/RF, none
1)
)
1) With the setting “none”, the heating circuit can be set via the RC35; it does not, however belong to the so-
called RC35 heating circuits (consequently, the room temperatures can be adjusted separately).
Heating circuit 1
Heating circuit 2
2)
2) Not available with some boilers.
Heating circuit 3
2)
Heating circuit 4
2)
Tab. 15 Allocation of heating circuits
To Next Page
Loading...
