Buderus SB615 - Information About the Appliance

2
Information about the appliance
Logano plus SB615 Gas - We reserve the right to make any changes due to technical modifications.
5
2 Information about the appliance
2.1 EU Declaration of Conformity
The design and operation of this product conform to
European Directives and the supplementary national
requirements. Its conformity is demonstrated by the CE
designation.
You can view the Declaration of Conformity on the
internet at www.buderus.de/konfo or request a copy from
your local Buderus sales office.
2.2 Correct use
The Logano plus SB615 Gas condensing boiler has been
designed for wet heating systems in e.g. multiple dwelling
units or in industrial applications. Any gas burner
type-tested to EN 676 can be used if its operating range
matches the boiler specifications.
2.3 Data plate
2.4 Standard delivery
B Upon delivery, check all packaging for damage.
B Check the delivered package(s) for completeness.
• Boiler mounted on pallet
• Connection pipe for low water indicator, connected to
the boiler body (for boiler size ≥ 400 kW)
• Technical documents, attached to boiler block
• Siphon in the combustion chamber
• Boiler casing with thermal insulation and accessory
bag, packed in the wooden crate
• Control unit with wiring diagram and operating
instructions for electronic boiler and heating circuit
control, packed in carton (accessories ordered
separately).
• Neutralisation device, packed in individual carton
(accessory ordered separately)
It is possible that some of the standard accessories will
not be necessary for certain boiler types.
2.5 Tools, materials and auxiliary
equipment
For the installation and maintenance of the boiler, you
require standard tools, as used in space heating as well
as gas and water installations.
The information on the type plate is binding
and must be observed!