EasyManua.ls Logo

Buffalo AirStation NFINITI High Power WHR-300HP - Default Wireless Settings

Buffalo AirStation NFINITI High Power WHR-300HP
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 96 -
Chapter 7 Default Conguration Settings
Feature Parameter Default Setting
DHCP Server
(Router Mode only)
Enabled
DHCP IP Address Pool
(Router Mode only)
192.168.11.2 - 192.168.11.65
LAN Side IP Address
(IP Unnumbered)
(Router Mode only)
None
Lease Period
(Router Mode only)
48 Hours
Default Gateway
(Router Mode only)
AirStation's IP Address
DNS Servers
(Router Mode only)
AirStation's IP Address
WINS Server
(Router Mode only)
Do Not Specify
Domain Name
(Router Mode only)
Assigned Domain Name
Default Gateway
(Bridge Mode only)
None
DNS Server Address
(Bridge Mode only)
None
DHCP
(Router Mode only)
Current DHCP Clients None
NAT
(Router Mode only)
Address Translation Enabled
Log Output of Deleted Packets Disabled
Routing Routing None
WPS WPS Enabled
External Registrar Enabled
AirStation PIN An 8-digit random value
(Printed on the label of the AirStation)
WPS Security Settings WPS status: Congured
SSID: BUFFALO-XXXXXX (the last 6
digits of the AirStations MAC
address)
Security: WPA/WPA2 mixedmode - PSK
TKIP/AES mixedmode
Encryption key: An 8-digit random value
(Printed on the Setup Card)

Table of Contents

Related product manuals