Buffalo CloudStation CS-X - Page 36

36
Folders - This lets you add or remove folders on your CloudStation. The user can control what to
expose on the cloud (accessible via cloud UI and the Pogoplug desktop and mobile apps) and what
to make visible only when you are in the same subnet as the CloudStation (samba and afp).
Device Name - You may change the name of your CloudStation here. The name may include up
to 15 alphanumeric characters, a hyphen or an underscore
Password - This is the login password for the local UI. It’s not related to the Cloud account. To
change the login password for your CloudStation, enter a new password here (twice) and click
Save. The default password is “password”.
Date/Time - You may set the date and time on the CloudStation manually or automatically. If
setting manually, enter a time zone, date, and time. Click Use Local Time to use the time from
your computer. Click [Save] when done.
Network - You may congure the IP address settings on the CloudStation manually or
automatically. Automatically (via DHCP) is recommended for most users. If Manually is selected,
enter the appropriate network settings and click Save. This setting can only be changed when you
are connected to the CloudStation locally as described above.
Storage - You may recongure the hard drive settings for the CloudStation here.
Notications - Enable Email Notication to have your CloudStation automatically send you
an email if errors occur. Click Add to enter the email addresses that notication will be sent
to. Choose which events (Hard Drive Status, Fan Failure, and/or Disk Error) will trigger a
notication. Click Send Test Message to send a sample email to registered addresses, or Save to
save your changes and exit. Note: if your notication emails don’t seem to arrive, check your junk
folder!