Chapter2 Using your LinkStation
LinkStation Setup Manual
2323
To protect your data in a shared folder accidentally being deleted (Using Recycle Bin).
You can configure a recycle bin for each folder on the configuration screen above (Not avail-
able for AppleTalk and FTP connections). It is just like a recycle bin on your OS. Deleted data in a
shared folder will be temporarily moved to a [Recycle Bin] folder. To recover deleted data, open
the [Recycle Bin] folder and move les.
To set a shared folder to Read-only
A shared folder will become Read-Only when you select the [Read Only] attribute of a shared
folder in the Shared Folder Conguration screen and click [Save].
Note: – This is set to [Read & Write] by factory default.
– A shared folder whose attribute is set to Read Only cannot be written by any users or
groups who has a privilege to read and write, therefore this folder will be read only for
all users.
– A shared folder whose attribute is set to Read Only or a USB hard disk with NTFS/HFS+
format, the message "(Read Only)” is added to the descriptions of that share folder.
To Next Page
Loading...
