LOWLANDER HD MK2 & WIDEBODY MANURE SPREADER – INSTRUCTION & SPARES MANUAL
Page 110
6.4.9 DRAWBAR SPRINGS
After the first laden journey, before intensive use or every 6 months (See figure 9.7)
- Retighten all the mounting U-bolt nuts to the recommended torque Item 2.
- Lubricate the attachment shaft Item 3.
Under harsh or intensive operating conditions, maintenance should be carried out more frequently.
Every year:
- Check the play between the bushing Item 4 and the spring drawbar shaft Item 1, and, if there is excessive play,
replace the worn parts.
- Check the general condition of the spring Item 5, clean it thoroughly and brush the sides of the springs to check for
cracks. Check the condition of the clamps Item 6.
To Next Page
