EasyManua.ls Logo

BUNNING 150HD - Page 116

Default Icon
148 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LOWLANDER HD MK2 & WIDEBODY MANURE SPREADER – INSTRUCTION & SPARES MANUAL
Page 111
6.4.10 MINIMUM PROGRAM OF MAINTENANCE
On commissioning
After the first laden journey
After the first 1000 km (620 mi)
Every 3 months
Every 6 months or 25 000 km (15 500 mi)
Before intensive service
Every 2 years of 50 000 km (31 000 mi)
Tightening and retightening wheel nuts X
X X X
Checking the hubcaps X
X
Checking the wheel bearing clearance
X X X
Lubricating the wheel bearings
X
Initial checks X
X X X
Checking clearance and wear X X
Adjusting brakes with fixed levers X X
Adjusting brakes with adjustable levers X X
Normal maintenance X X
Checking & adjusting the wheel alignment
X
Locking cylinder maintenance & adjustment
X
Adjusting the clearance, steering axles with
tapered pins only
X
Adjusting the steering angle
X
X X X
X X X
X X XDrawbar Spring
Basic tandem suspension, tandem and tridem
This maintenance plan is intended for normal
operating conditions. More frequent
maintenance may be required for harsh
operating conditions(construction sites,
mountains, intensive use, etc)...
See the following paragraphs for detailed
maintenance instructions.
Axle maintenance and adjustment
Brake maintenance and adjustment
Rod half-tandem suspension, tandem and tridem
Steering axles