LOWLANDER HD MK2 & WIDEBODY MANURE SPREADER – INSTRUCTION & SPARES MANUAL
Page 137
14. IDENTIFICATION PLATE
The machine serial number (VIN) is required with all orders for spare parts and technical enquires. This is
necessary in order to ensure correct delivery of spare parts.
The identification plate with the machine number is either attached to the middle right side of the machine
drawbar, front left hand side of the sprung drawbar frame, or the left hand side of the full-length chassis.
IMPORTANT
It is absolutely forbidden to alter and/or erase the data written on the identification plate of the machine.
The operator is required to verify frequently the legibility of the data and, when this in doubt, to
communicate with the Manufacturer. The data will be transferred to a new plate to replace the old one.
The CE mark certifies that the Manufacturer has complied with regulations in force governing machinery
and covering health and safety matters as specified for all EU Member states (Machinery Directive). In
practical terms, the CE mark guarantees that the Manufacturer has designed and constructed the machine
in such a way as to avoid and minimize risk and danger, in anticipation of the function and the conditions
under which the equipment will be used. The equipment may be used in Europe only if it is equipped with
the identification plate and provided with the declaration of conformity.
To Next Page
