Diagram 3.
Pellet burner consignment elements
6. STORAGE OF PELLET BURNER
Pellet burners shall be stored in dry and
well venllated spaces, free from any
gases, liquids, acids and oil vapours that
may damage the burner. Storing burner
and auger in spaces with ferlizers,
chlorinated lime, acids, chemicals, ect.
is not allowed. Recommended storage
temperature shall be from +5°С tо +40°С.
Recommended relave humidity -below
70%. When stored, the devices shall not
have direct contact with the ground,
placed on pallets, maximum two ers and
in their original packaging. The storage
period is not more than 2 years from date
of manufacture. It is recommended that
every burner is tested before installaon.
Quality and safety of the burner must
be conrmed by a test menoned in the
warranty card.
7. MOUNTING OF THE BURNER
Mounting,installationandsetup
ofburnershouldbe carriedout
byauthorizedtechnician.
Installer shall advise the user
of the installation minimum
clearances to combustible
materialsandliquids.
Recommended boiler chamber sizes for
mounng of Pell pellet burner:
Diagram 4.
Mounng of Pell pellet burner
to boiler combuson chamber
To Next Page
Loading...
